Name: Compression load cell MEDP
Brand: Gicam

Compression load cells for weighing platforms, silos, hoppers etc..

Compression load cell

Upon request with ATEX or IECEx certification

Click to enlarge image

Material	Stainless steel
Nominal load	1000, 2500, 5000 kg
Limit load	150 % F.S.
Breaking load	300 % F.S.
Supply voltage	Vcc 15 Max
Output	2 mV/V
Output tollerance	0,1 % F.S.
Zero tollerance	1 % F.S.
Linearity	0,1 % F.S.
Hysteresis	0,1 % F.S.
Reapeatability	0,1 % F.S.
Input resistance	350 - 360 Ω (P1 + P2)
Output resistance	351 - 355 Ω (P1 + P2)
Insulation resistance	>= 2000 Mohm
Creep (30 Minutes)	0,2 % F.S.
Thermal compensation	-10 / +40°C (14 / +104°F)
Operating temperature	-20 / +70°C (-4 / +158°F)
Temperature deviation zero	0,003 % F.S. / °C
Temperature deviation full scale	0,002 % F.S. / °C
Protection class	IP 67
Standard cable length	2 cables: 5 m – 4 x 0,25 (shield not connected to the load cell body)

General precautions to be followed in the installation and assembly of load cells:

Follow the direction of application of force on the load cell
Do not exceed the limits of the temperature as indicated in the data sheet
Do not remove labels from the load cell
Adequately protect the cables with sleeves or channels
Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
Do not carry out any welding on the mechanical structure after mounting the load cell
Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
Protect load cell from any dust accumulation with any appropriate means

Type	SHIELDED CABLE 4C R5 PUR 4X0,25
Length	5 m (body lead cell not connected shield)
Red	+ IN
Black	- IN
Green	+ OUT
White	- OUT

Compression load cell MEDP